As a hot selling product, some key issues related to the spot check of the stacker, the key to the normal operation of the stacker, the need for good maintenance, adequate lubrication of the equipment, good operation of the components, timely inspection of important components of the brake pads, and ensuring timely shutdown of the stacker are all very important points that need attention. So let's take a look with the stacker manufacturer next.
1、 The clearance between the lifting brake discs of the stacker shall not be greater than 0.5mm, and timely inspection shall be conducted to ensure safe production and operation.
2、 The clearance between the brake discs of the traveling motor of the stacker should not be greater than 0.5mm. Timely inspection should be carried out to ensure safe production and operation.
3、 The upper limit and lower limit of the lubricating oil level for the lifting gear unit shall be filled according to the requirements to ensure safe production.
4、 Lift the drum buffer wear value, check the point, reach the left and right scale lines, and replace the buffer pad with a new one.
5、 The lifting gear unit lubricating oil, filter indicator, and alarm indicator light up to replace the filter element.
6、 Check and replace the motor cushion regularly.
So the above six points relate to the professional knowledge of stacker stereoscopic warehouses. We should firmly grasp these key points of point inspection, so as to better utilize stackers.
